Bushings & insulators
High-pressure entrance bushing
SKU AH-EC-1001
Carries the high-voltage conductor from the transformer or power unit through the pressure boundary of a desalter, dehydrator or prewash coalescer vessel to the…
Power connecting rod
Connects the conductor of the entrance bushing to the energised electrode grid inside a desalter or dehydrator, carrying the high-voltage supply through the oil phase. It must keep a sound electrical connection through thermal cycling and vibration.
- SKU
- AH-EC-1004
- Category
- Electrodes & internals
- Condition
- New
- Status
- Made to order
- Indicative lead time
- On application
Add to enquiry: Power connecting rod
Compatibility: Power connecting rod
Matched to the entrance bushing and grid connection of the vessel. Usually ordered together with the entrance bushing. Length and end connections are confirmed from a drawing or site measurement.
Standards and documentation: Power connecting rod
Documentation available with supply
- EN 10204 3.1 material test certificate
- Certificate of conformity
Images: Power connecting rod
Information on this page is indicative. Final suitability and compatibility must be confirmed against your equipment, its serial or tag data and its operating conditions before order. Lead-time bands are indicative and are confirmed at quotation.
Solutions related to Power connecting rod
Electrostatic coalescer prewash
An electrostatic coalescer prewash removes entrained caustic from kerosene after the caustic prewash of a kerosene sweetening unit. A high-voltage direct current (DC) field makes the…
Electrostatic coalescers
An electrostatic coalescer is a pressure vessel that uses a high-voltage electric field to merge small water droplets in crude oil into drops large enough to…
Crude oil dehydrators
A crude oil dehydrator is an electrostatic coalescer used to remove produced water from crude so that it meets its basic sediment and water (BS&W) specification.…
Crude oil desalters
A crude oil desalter removes salt from crude by mixing in low-salinity wash water to dilute the brine, then removing the water in an electrostatic coalescer.…
Crude oil treatment
A crude oil treatment system removes water, salt and sediment so that crude meets its sales or refinery specification. It works as a train: separation, heating,…
Engineering services for Power connecting rod
Troubleshooting and performance diagnostics
Troubleshooting a desalter, dehydrator or hydrogen pressure swing adsorption (PSA) unit starts with the symptom, because each symptom has a short list of probable causes and…
Process and detailed design
Process and detailed design turns a requirement, often no more than a datasheet, into a complete package that a fabricator can build and an operator can…
Design review for capacity enhancement
A design review for capacity enhancement establishes what actually limits an existing crude oil treatment train or hydrogen purification unit, and which changes remove that limit…
Spare parts related to Power connecting rod
Bushings & insulators
Insulating sleeve
SKU AH-EC-1005
Insulates the high-voltage conductor where it passes close to earthed metal, such as the vessel nozzle or internal supports, inside a desalter or dehydrator.…
Bushings & insulators
Electrode insulator
SKU AH-EC-1002
Suspends an energised electrode grid from the vessel structure inside a desalter, dehydrator or prewash coalescer and isolates it electrically from earth. Insulators work…
Electrodes & internals
Electrode grid assembly
SKU AH-EC-1003
Forms the energised and earthed electrodes between which the electric field is created inside a desalter or dehydrator. Water droplets passing through the field…
Transformers & power units
Transformer bushing and power supply bushing
SKU AH-EC-1006
Carries the high-voltage output of a desalter, dehydrator or prewash coalescer transformer or power unit out of the transformer tank and into the conduit…
Add to enquiry: Transformer bushing and power supply bushing
Only have a nameplate photo, a tag number or a drawing reference?
That is enough to start. Send what you have for a desalter, dehydrator, electrostatic coalescer or hydrogen adsorption unit, whoever built it, and we will identify the equipment and the parts it needs. Final compatibility is always confirmed against your equipment data and operating conditions.