Solutions
Process equipment for upstream, refinery and renewables
Electrostatic coalescers that dehydrate and desalt crude, heaters and degassers around them, the crude unit desalter and kerosene prewash in the refinery, and pressure and temperature swing adsorption for hydrogen. Every package is designed and manufactured by Axsia Howmar and delivered from process design through to commissioning.
- Markets: upstream production, refinery and renewable hydrogen
- 3
- Equipment packages, each with its own design basis, data and spare parts
- 8
- Designed and manufactured by Axsia Howmar; fabrication by approved and audited fabricators
- Design to commissioning
Send a technical enquiry Engineering services for units in service
01 Upstream
Upstream crude oil treatment
Water, salt and gas out of the crude at the production facility
A crude oil treatment system removes water, salt and sediment so that crude meets its sales or refinery specification. It works as a train: separation, heating, then dehydration and desalting in electrostatic coalescers. Axsia Howmar designs the train as one system, because the basic sediment and water (BS&W) and salt results at the outlet depend on every stage upstream.
Packages in this market
- Crude oil degasser dehydratorA crude oil degasser dehydrator is a two-vessel package: a degasser stacked above an electrostatic dehydrator…
- Crude oil heatersA crude oil heater raises crude to the temperature at which water can be separated from…
- Electrostatic coalescersAn electrostatic coalescer is a pressure vessel that uses a high-voltage electric field to merge small…

02 Refinery
Refinery
The crude unit desalter, kerosene prewash and hydrogen from the reformer
In a refinery the crude oil desalter is the first process unit the crude meets, and everything downstream depends on it: preheat exchangers, the crude column overhead, hydrotreating catalysts and the wastewater plant. Axsia Howmar designs and manufactures desalter and dehydrator packages for crude units, supplies the power units that energise them, and reviews and troubleshoots units already in service. Fabrication is subcontracted to approved and audited fabricators under our supervision.
Packages in this market

03 Renewables
Hydrogen purification
Dry, oxygen-free hydrogen from the electrolyser to fuel-cell purity
Hydrogen purification removes the other gases from a hydrogen-rich stream until it meets the purity its user needs. Four technologies do most of this work: pressure swing adsorption (PSA), temperature swing adsorption (TSA), membranes and cryogenic separation. Axsia Howmar designs and manufactures PSA and TSA packages, and this page says plainly where each of the four fits.
Packages in this market
- Hydrogen DeOxo dryer for electrolyser hydrogenA hydrogen dryer takes wet hydrogen from an electrolyser, which also contains a little oxygen, and…
- PSA hydrogen purificationPressure swing adsorption (PSA) purifies hydrogen by passing a hydrogen-rich gas through beds of adsorbent at…
- TSA hydrogen purificationTemperature swing adsorption (TSA) removes water and other strongly held trace impurities from a gas by…

Only have a nameplate photo, a tag number or a drawing reference?
That is enough to start. Send what you have for a desalter, dehydrator, electrostatic coalescer or hydrogen adsorption unit, whoever built it, and we will identify the equipment and the parts it needs. Final compatibility is always confirmed against your equipment data and operating conditions.
