Why high-pressure entrance bushings fail
High-pressure entrance bushings fail by electrical tracking across the insulation surface or breakdown through it. The usual triggers are water or conductive deposits reaching the bushing surface, operation above the rated temperature, and damage during installation. Repeated failures usually point to a process cause inside the vessel; see coalescer power unit tripping.
Pressure tested before despatch
Every high-pressure entrance bushing is pressure tested before it leaves the works, because the bushing forms part of the vessel pressure boundary. The test is recorded and the pressure test certificate is supplied with the part, together with the material test certificate (EN 10204 type 3.1), the certificate of conformity and the high-voltage test record, so the bushing can be entered in the vessel records on arrival. The pressure and high-voltage tests can be witnessed at the works by arrangement; book this when you place the order.
Made in Britain
Axsia Howmar manufactures its desalter entrance bushings in the United Kingdom, and we are proud to build them in Britain. Every bushing is made and tested here before despatch, and you are welcome to witness the pressure and high-voltage tests by arrangement.
Material grade, and why non-original bushings are a false economy
The bushing is the one component that is both a pressure part and the high-voltage insulator, so the material grade is not negotiable. Axsia Howmar bushings use the insulating body, conductor and sealing materials of the grade the original design specifies, with the material test certificate to show it.
Replica or third-party bushings made to a lower material grade, or without the original drawings, may look identical and fit the nozzle, yet carry a different insulation and pressure margin. The usual result is electrical tracking or breakdown in service, which trips the power unit and takes the desalter or dehydrator off its duty. A bushing is a small part of the vessel cost; the lost throughput and crude quality penalties of an unplanned shutdown to replace it can run to far more than the price difference. For a part that holds vessel pressure and high voltage at the same time, buy from the original equipment manufacturer, or from a supplier working to the original drawings and material specifications, and ask for the material and pressure test certificates with the quotation.
Also supplied: AxiLatch™ HV
For new packages and selected replacement applications, Axsia Howmar also supplies AxiLatch™ HV, an entrance bushing that brings insulation, multi-stage sealing and conductor support together in one compact assembly. It is supplied by enquiry, with the fit confirmed against the vessel before quotation.







