About Axsia Howmar

A new package, a unit that is not performing, or a unit that must do more. One engineering team takes it from there.

Axsia Howmar is a UK engineering consulting and contracting company for crude oil treatment and hydrogen purification. We design and manufacture the packages, approved and audited fabricators build them to our drawings under our supervision, and we commission and hand them over. For units already in service, of any make, the same engineers review, troubleshoot, enhance and keep them supplied with parts.

From datasheet to handover as one scope, or any part of the chain you need
Turnkey
Process and detailed design by Axsia Howmar; built to our drawings by approved and audited fabricators
Engineered
Start-up, performance test and operator training at site, with a complete record book at handover
Commissioned
Spare parts, troubleshooting, performance surveillance and revamps for units of any make
After-sales service

Send a technical enquiry Quality management

Who we are

An independent UK engineering consulting and contracting company

Our engineers, and the network of specialist engineers we work with, have decades of experience designing, commissioning and supporting indirect fired heaters, electrostatic dehydrators and desalters, kerosene prewash coalescers, and hydrogen pressure swing adsorption (PSA) and temperature swing adsorption (TSA) units for oilfields and refineries in the Middle East, Europe and elsewhere. That is what lets us identify a legacy unit from a nameplate, read a desalter's power unit signals for what they mean, and design a package that can be built, operated and maintained without surprises.

Ask for project references

Skid-mounted indirect fired heater package installed and operating.
Skid-mounted indirect fired heater package installed and operating.

Three ways in

Whatever state the plant is in, there is a door for it

Most engineering companies do one of these. We do all three with the same people and the same models, which is why a troubleshooting job can turn into a revamp, and a revamp into a new package, without starting again.

  • 01

    A new package

    When the plant needs equipment it does not have yet.

    You bring
    A datasheet, a crude assay or gas analysis, a specification, a plot.
    We return
    A process design, a detailed design, a fabricated and tested package, a commissioned unit and a record book.
    Process and detailed design
  • 02

    A unit that is not performing

    When the BS&W, the salt, the purity or the power unit will not behave.

    You bring
    Trends, laboratory results, the nameplate and what you are seeing.
    We return
    The probable cause, the data that confirms it, the fix, and the surveillance that catches the next one early.
    Troubleshooting and performance surveillance
  • 03

    A unit that must do more

    When throughput, water cut or the specification has moved past the original design.

    You bring
    The original datasheets and drawings, today's operating data and tomorrow's target.
    We return
    The binding limit, the options ranked by gain and cost, and the internals, power units or extra stage that remove it.
    Design review for capacity enhancement

Turnkey, or any part of it

Nine links from datasheet to handover. Take the chain, or the link you are missing.

Design and manufacture stay with Axsia Howmar. Fabrication is subcontracted to fabricators that we, or the client, have approved and audited, working to our drawings and our inspection and test plan. The engineering stays in one place; the steel can be cut close to the site.

  1. Datasheetduty, feed, specification
  2. Process designsizing, model, PFD
  3. Detailed designvessels, internals, electrics
  4. Procurementpower units, valves, adsorbents
  5. Fabricationapproved fabricator, our drawings
  6. Inspection and testagreed ITP, hold and witness points
  7. Deliveryas one lift where the design allows
  8. Commissioningstart-up, operator training
  9. Handoverrecord book, O&M manual, spares list

Axsia HowmarApproved and audited fabricator, under our supervision

What we design and build

Six packages, two fields

Standards and codes

Designed to the codes the project names

The code set is fixed per project. These are the ones that recur.

  • ASME BPVC VIIIPressure vessels; PD 5500 or EN 13445 where a UK or European code is specified
  • PED 2014/68/EU, UK PE(S)RConformity of pressure equipment for the installation jurisdiction
  • API 12L, API 560Emulsion treaters and fired heaters where specified
  • IEC 60079, ATEX, UKEXPower units, junction boxes and instruments in hazardous areas
  • NACE MR0175 / ISO 15156Materials for sour service

Axsia Howmar Limited

Registered
England and Wales
Company number
17467149 (Companies House record)
Registered office
Devonshire House, 582 Honeypot Lane, Stanmore, Greater London, HA7 1JS, United Kingdom
Telephone
+44 20 4577 2308
Email
enquiries@axsiahowmar.com
References
Shared on request under confidentiality; no client names or plant data published

Tell us which door you are at

A datasheet for a new package, trends from a unit that is misbehaving, or a target the existing unit cannot reach. Partial data is normal: send what you have and we will tell you what else matters. We acknowledge every enquiry within 1 working day.