Request a quote

Basic sediment and water (BS&W)

Basic sediment and water (BS&W) is the combined volume of water and solid sediment in a crude oil sample, reported as a volume percentage. It is the usual measure of how well crude has been dehydrated before sale or refining.

Also written as: BS&W, BSW, S&W

Basic sediment and water (BS&W) explained

BS&W is commonly measured by centrifuge (for example ASTM D4007). Water alone can be measured by distillation (ASTM D4006) or Karl Fischer titration (ASTM D4928). Pipeline and sales specifications commonly fall between 0.2 and 1.0 vol%; the figure that applies to you is set by your contract.

  • Crude oil dehydrators

    A crude oil dehydrator is an electrostatic coalescer used to remove produced water from crude so that it meets its basic sediment and water (BS&W) specification.…

  • Crude oil heaters

    A crude oil heater raises crude to the temperature at which water can be separated from it. In oilfield treatment this is usually an indirect fired…

  • Electrostatic coalescers

    An electrostatic coalescer is a pressure vessel that uses a high-voltage electric field to merge small water droplets in crude oil into drops large enough to…

  • Crude oil treatment

    A crude oil treatment system removes water, salt and sediment so that crude meets its sales or refinery specification. It works as a train: separation, heating,…

  • Troubleshooting and performance diagnostics

    Troubleshooting a desalter, dehydrator or hydrogen pressure swing adsorption (PSA) unit starts with the symptom, because each symptom has a short list of probable causes and…

Emulsion (water-in-oil)
A water-in-oil emulsion is a dispersion of small water droplets in crude oil, held apart by natural surface-active films of asphaltenes, resins, waxes and fine solids. The droplets will not settle until those films are broken and the droplets merge.
Crude oil dehydrator
A crude oil dehydrator is an electrostatic coalescer that removes produced water from crude oil to meet a water specification, usually stated as basic sediment and water. No wash water is added. It is the same equipment as a desalter.
Electrostatic coalescer
An electrostatic coalescer is a pressure vessel with energised electrode grids, in which a high-voltage field coalesces water droplets in crude oil so they settle. Used without wash water it is a dehydrator; with wash water it is a desalter.
Demulsifier
A demulsifier is a surface-active chemical injected into crude oil at parts-per-million levels to displace the natural films that stabilise water droplets. With the films weakened, droplets can merge and settle. It works together with heat, time and electrostatic fields.
Interface level
Interface level is the height of the boundary between settled water and the oil above it in a separator, dehydrator or desalter. Controlled by the water outlet valve, it must sit below the electrodes and above the water outlet.
Rag layer
A rag layer is a band of emulsion and solids that collects at the oil-water interface in a separator or desalter. As it grows it reduces settling volume, confuses level instruments and may reach the electrodes or the water outlet.

Talk to an engineer about your unit

Tell us the equipment, the duty and what you are seeing. Partial data is normal: send what you have and we will tell you what else matters. We acknowledge every enquiry within 1 working day.

Send a technical enquiry
Download the capability statement